On Mon, 24 Jul 2006 20:40:59 -0700, Frank Gilliland
wrote in
:

snip
I took a pic if you want to see.


http://www.icehouse.net/wirenut/roof_mt.jpg

The green cord was used to pull the coax and dome light wires through
the channel. I installed the coax mount first for testing, and that's
why the coax is coming out of the dome light hole. After testing I
replaced it with a flush mount that allowed the dome light to be
reinstalled.

As an afterthought, I should have used teflon coax (considering the
poor condition of the dome light wires after years of summer heat),
but it's an old truck and standard coax will probably outlive the
truck.