John:
I wrote a
VB one that works pretty good. I wrote it for my M-7000 but you
are welcome to try it if you have the
VB 6.0 runtime files.
--
Brian Denley
http://home.comcast.net/~b.denley/index.html
"John" wrote in message
ps.com...
Folks a follow up to this is: What is the best ( DOS or Windows)
software to use with this setup? M7000KTerm, Hyperterm, Kterm, etc.
// John
John wrote:
Can you folks verify the correct cable connections between a PC serial
port 9-pin or 25-pin and the J2 accessory connector on the rear of the
Universal M-7000 Decoder.
M-7000 RS-232 PC Serial Port (9-pin)
J-2 Pin
4 TD Transmit Data 3
5 RD Receive Data 2
6 DTR Data Terminal Ready 4
17 Ground 5 Signal/ Logic Ground
6 DSR Data Set Ready
7 RTS Request to Send
8 CTS Clear to Send
NOTE: RS-232 Pin 4 tied to Pin 6
Pin 7 tied to Pin 8
M-7000 RS-232 PC Serial Port (25-pin)
J-2 Pin
4 TD Transmit Data 2
5 RD Receive Data 3
6 DTR Data Terminal Ready 20
17 Ground 7 Signal / Logic Ground
9 DSR Data Set Ready
4 RTS Request to Send
5 CTS Clear to Send
NOTE: RS-232 Pin 6 tied to Pin 20.
Pin 4 tied to Pin 5