On Nov 3, 5:49 pm, Telamon
wrote:
In article .com,
wrote:
If you need to prototype or build a lumped element RF filter, check
out the RF Filter PCBs at RF Bites.
http://www.rfbites.com
Those are not very good coax to PCB connectors. You can do better. Must
be pretty low frequency stuff ( 1 GHz ) if you are using FR4.
--
Telamon
Ventura, California
So, what material do you use over 1GHz? You buget guy must really not
like you. BTW, I didn't design these boards, nor to I work for these
guys. I just got my board in the other day and was pumped up when I
was able to build up a filter quickly. It's in my tuner right now,
filtering away. My filter has good rejection (50dB) up to 3.5GHz, and
it starts to fall apart.