Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
RF Filter PCBs
On Nov 3, 5:49 pm, Telamon
wrote: In article .com, wrote: If you need to prototype or build a lumped element RF filter, check out the RF Filter PCBs at RF Bites. http://www.rfbites.com Those are not very good coax to PCB connectors. You can do better. Must be pretty low frequency stuff ( 1 GHz ) if you are using FR4. -- Telamon Ventura, California So, what material do you use over 1GHz? You buget guy must really not like you. BTW, I didn't design these boards, nor to I work for these guys. I just got my board in the other day and was pumped up when I was able to build up a filter quickly. It's in my tuner right now, filtering away. My filter has good rejection (50dB) up to 3.5GHz, and it starts to fall apart. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RF Filter PCBs | Equipment | |||
Software DSP audio filter programs versus hardware audio filter DSP units | Shortwave | |||
AR88s and PCBs | Boatanchors | |||
where to get burs for Dremeling PCBs? | Homebrew | |||
Making PCBs | Homebrew |