Thread: GM-300 Question
View Single Post
  #3   Report Post  
Old November 8th 07, 02:11 PM posted to rec.radio.swap
[email protected] Sactokings@att.net is offline
external usenet poster
 
First recorded activity by RadioBanter: Oct 2007
Posts: 3
Default GM-300 Question

On Nov 7, 3:22 pm, "Chuck Carlson, KD6RSQ" wrote:
I have a Motorola GM300 that will not turn off the radio with the
power/volume knob even with the 16 pin assy. plug removed. Any hints?
Thanks
Chuck


Chuck,
Quick question: Is this a radio you just picked up or was this a
working radio that started having a problem? Point is, I've aquired
radios that have been pre-modified from the previous owner (for
different reasons) and had to spend time attempting to return the
radio back to it's original state. Have you checked the on/off switch
to make sure it hasn't been soldered short, thus bypassing the on/ off
switch? Consider the same for the 16 pin... You may also want to
program the radio and disable the ignition sense till you find the
problem, just a thought...

Let me know your findings...

Regards,
David (((