On Thu, 13 Dec 2007 08:40:53 -0800, Roger wrote:

And just for completeness...
The fundamental equations also work when:
- the signal is not sinusoidal, e.g. pulse, step, square, ...
- rather than a load at one end, there is a source at each end
- the sources at each end produce different arbitrary functions
- the arbitrary functions at each end are DC sources
It is highly instructive to compute the forward and reverse
voltage and current (and then power) for a line with the same
DC voltage applied to each end.

...Keith

...Keith

Interesting! The important thing is to get answers that agree with
our experiments.

I have done some computations for DC voltage applied to transmission
lines. The real surprise for me came when I realized that transmission
line impedance could be expressed as a function of capacitance and the
wave velocity. Z0 = 1/cC where c is the velocity of the wave and C is
the capacitance of the transmission line per unit length.

Hi Roger,

This last round has piqued my interest when we dipped into DC. Those
"formulas" would lead us to a DC wave velocity?

73's
Richard Clark, KB7QHC