In article , Ken wrote:
Henry Kolesnik wrote:
A while back I bought a Radio Frequency Labs 459A Crystal Impedance
Meter with a range of 0.8 to 15 MC. I think the military version is
TS-330/TSM. I really want to try this thing out but need a manual or
instructions, and a schematic if it isn't working. I've already got too
much into it to spend another $30.00 for a commercial manual. I've
Googled for free manual and can find nothing. Anyone have a PDF or a
manual they want to sell cheap?
Thanks
If you have a lot in it, all the more reason to spend more on a manual.
Try: http://www.agtannenbaum.com/
I'm not really sure you shouldn't be able to operate the thing without
a manual... it should have a test oscillator inside, a meter, and a place
where you put a crystal. Insert the crystal, then swing the oscillator
back and forth until you read the resonance point on the meter.
Some models out there required an external oscillator.
See if you can get a manual for an AN/TSM-15. That should give you at
least the basic principles of operation for the things.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."