Need a few BNC chassis mounts
Pete Bertini wrote:
"Sjouke Burry" wrote in message
...
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.
Pete
We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.
But this is going into a hole that was already drilled for the
part.
Pete, I have some that *might* work. Hard to tell exactly. These have
a 10mm long threaded portion.
-Bill
|