Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Need a few BNC chassis mounts
Pete Bertini wrote:
"Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill |
#2
|
|||
|
|||
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete Bertini wrote: "Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Hi Bill Regular style has about 7 threads, mine has 11, plus there is a shouldered area between the panel stop and first thread that is probably equal to the area that would be used by another four threads. Pete |
#3
|
|||
|
|||
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. Pete |
#4
|
|||
|
|||
Need a few BNC chassis mounts
Pete Bertini wrote:
"Bill M" wrote in message ... Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. Pete Glad they worked out. -ex |
#5
|
|||
|
|||
Need a few BNC chassis mounts
On 4/16/2010 8:31 PM, Pete Bertini wrote:
Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. I recognize that number, you're working on one of the plug-ins for the 141 spectrum analyzer. Jeff |
#6
|
|||
|
|||
Need a few BNC chassis mounts
"Jeffrey Angus" wrote in message ... On 4/16/2010 8:31 PM, Pete Bertini wrote: Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. I recognize that number, you're working on one of the plug-ins for the 141 spectrum analyzer. Jeff Hi Jeff Yeppurs. For some odd reason folks used these for bean toss games. I've seen quite a few with damaged BNC jacks! I only had one deck out of several that had a damaged jack. Now all three of the 141Ts are populated and working! Pete |
#7
|
|||
|
|||
Need a few BNC chassis mounts
"Jeffrey Angus" wrote in message ... On 4/16/2010 8:31 PM, Pete Bertini wrote: Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. I recognize that number, you're working on one of the plug-ins for the 141 spectrum analyzer. Jeff Hi Jeff Yeppurs. For some odd reason folks used these for bean toss games. I've seen quite a few with damaged BNC jacks! I only had one deck out of several that had a damaged jack. Now all three of the 141Ts are populated and working! Pete |
#8
|
|||
|
|||
Need a few BNC chassis mounts
Pete Bertini wrote:
"Bill M" wrote in message ... Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. Pete Glad they worked out. -ex |
#9
|
|||
|
|||
Need a few BNC chassis mounts
On 4/16/2010 8:31 PM, Pete Bertini wrote:
Bill's BNCs worked perfectly. Extra long shafts. Was able to fix the remaining damaged HP 8552B IF deck this evening. I recognize that number, you're working on one of the plug-ins for the 141 spectrum analyzer. Jeff |
#10
|
|||
|
|||
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete Bertini wrote: "Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Hi Bill Regular style has about 7 threads, mine has 11, plus there is a shouldered area between the panel stop and first thread that is probably equal to the area that would be used by another four threads. Pete |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mobile mounts | Equipment | |||
MILITARY MOUNTS | Boatanchors | |||
UHF Mounts ?? | CB | |||
Universal Mounts | Swap | |||
FS: Two mobile antenna mounts | Swap |