Need a few BNC chassis mounts
"Bill M" wrote in message
...
Pete Bertini wrote:
"Sjouke Burry" wrote in message
...
Pete Bertini wrote:
Right and wrong examples shown in photo. Threaded shaft needs to
be a tad longer than normal to fit thicker panel. HP 8552B IF deck.
Pete
We solved that by buying a ?tap?(not sure about the english name)
and thread the hole.
But this is going into a hole that was already drilled for the
part.
Pete, I have some that *might* work. Hard to tell exactly. These have a
10mm long threaded portion.
-Bill
Hi Bill
Regular style has about 7 threads, mine has 11, plus there is a shouldered
area between the panel stop and first thread that is probably equal to
the area that would be used by another four threads.
Pete
|