Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Need a few BNC chassis mounts
"Bill M" wrote in message ... Pete Bertini wrote: "Sjouke Burry" wrote in message ... Pete Bertini wrote: Right and wrong examples shown in photo. Threaded shaft needs to be a tad longer than normal to fit thicker panel. HP 8552B IF deck. Pete We solved that by buying a ?tap?(not sure about the english name) and thread the hole. But this is going into a hole that was already drilled for the part. Pete, I have some that *might* work. Hard to tell exactly. These have a 10mm long threaded portion. -Bill Hi Bill Regular style has about 7 threads, mine has 11, plus there is a shouldered area between the panel stop and first thread that is probably equal to the area that would be used by another four threads. Pete |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mobile mounts | Equipment | |||
MILITARY MOUNTS | Boatanchors | |||
UHF Mounts ?? | CB | |||
Universal Mounts | Swap | |||
FS: Two mobile antenna mounts | Swap |