On Tue, 11 May 2004 11:16:12 -0400, "Tim" wrote:
I'm sure this is in the handbook, but darned if I can find it.
I'm using a MAR-6 after a DDS and filtered output for a little gain into a
passive mixer, the DDS will be used for 1-30 MHz or so, how do I calculate
the value of the RF choke at the DC supply side? I hope this question is at
least coherent...
Tim ka8ddz
Read their appnote on biasing mmic amps...
http://www.minicircuits.com/appnote/an60010.pdf
Remove "HeadFromButt", before replying by email.