On Sat, 14 Jan 2012 11:58:58 -0900, you wrote:
In article
,
JIMMIE wrote:
I've recently had some problems with crimp on N connectors on LMR 600
super flex cable. Although the connector seemed to be well waterproofed
there was corrosion between the coax shield and the connector at the
crimp. This problem was found on three antennas that used this
connector and cable. I suspect it was a poor quality connector that
caused the problem. Connectors plating was peeling off at the point of
connection. If someone could advise me on the best quality N connector
for LMR 600 super flex I would very much appreciate the advice.
Jimmie
KD4RQE
Get yourself the AMP or Andrew, compression type Connectors
http://www.davisrf.com/rf-connectors.php