| Home |
| Search |
| Today's Posts |
|
#3
January 15th 12, 03:11 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
LMR 600 N connectors
On Sat, 14 Jan 2012 11:58:58 -0900, you wrote:
In article , JIMMIE wrote: I've recently had some problems with crimp on N connectors on LMR 600 super flex cable. Although the connector seemed to be well waterproofed there was corrosion between the coax shield and the connector at the crimp. This problem was found on three antennas that used this connector and cable. I suspect it was a poor quality connector that caused the problem. Connectors plating was peeling off at the point of connection. If someone could advise me on the best quality N connector for LMR 600 super flex I would very much appreciate the advice. Jimmie KD4RQE Get yourself the AMP or Andrew, compression type Connectors http://www.davisrf.com/rf-connectors.php |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| F connectors | Antenna | |||
| Need help with connectors | Equipment | |||
| RF Connectors | Scanner | |||
| More connectors | Antenna | |||
| FA - (15) New "N" Connectors | Swap | |||
Threaded Mode
