View Single Post
  #8   Report Post  
Old January 17th 14, 05:11 PM posted to rec.radio.amateur.antenna
Jerry Stuckle Jerry Stuckle is offline
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default Rhon tower bolts

On 1/17/2014 10:35 AM, Ralph Mowery wrote:
"gareth" wrote in message
...
Do you left-pondians need to get planning or zonal permission for such
things as we do here in the land that is still plagued by the
Normano-Viking
invaders and their spawn?


It all depends on where the station is located at in the US. I live in
North Carolina and out from the city. There is no requirement in the county
I live in for any kind of permit for a ham tower. About 8 years ago I put
up a 60 foot tower and did not need any permits or any other offical paper
work.

I am thinking the FCC limits the tower to 200 feet and some restrictioins if
near an airport in all parts of the country.

Some areas you can not put up a tower of any kind, and some areas need to
have permits and limit the tower to how tall it can be. Some areas require
some enginering paperwork to make sure the tower will not fall under
ordinary use.



Actually, the FCC doesn't limit towers to 200'. But anything over 200'
has to be lighted and registered so it can appear on air navigation
charts. Then there are all kinds of other hassles like ensuring the
lights are always working at nighttime and having to climb a tower in 10
degree F weather with a 20mph wind (on the ground) to replace a burned
out light bulb (I know - I had to do it when I was young and stupid and
worked on towers ).

For most hams, it's just not worth the hassle.

--
==================
Remove the "x" from my email address
Jerry Stuckle

==================