"GeorgeF" wrote in message
ink.net...
I’m experiencing some strong interference across the 6 meter band which
I believe is coming from a local (within 40 miles) TV channel 2. Where
can I get a filter to deal with this? Is there a low pass filter with
a cutoff at 54 MHz? I only work SSB and CW on 6 so I’m only interested
in the lower portion of the band, if I cut off 52 MHz and above that
would be fine by me…..
George
Possibly you could notch it out. Look around for a ARRL handbook and check
out the subject.
Sometimes a hunk of coax with a trim cap can do the trick. Or you may have
to get more elaborate. Start out simple. Again look it up in a ARRL
handbook. I don't know about the new ones, since its all appliance ops now
a days.
Dan/W4NTI
|