Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
"Owen Duffy" wrote:
But, the mechanism is not that the reflected wave *necessarily* travels all the way back to the PA anode by virtue of some kind of momentumne / feedpoint junction are fully satisfied with no reflected wave on the feedline. (I used the term resolve, Cecil must call it destructive interference.) The reflected wave on the dipole does not have a momentum that *must* carry it to the PA anode to be absorbed there. _____________ However, any amount of reflected power from the termination at the far end of a transmission line has a greater chance of damaging tx PA components, and of stress/failure to the transmission line itself than if the reflected power from the antenna/load was zero, regardless of the electrical length of said transmission line. This reality of physics is not subject to debate, don't you agree? RF |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Workman BS-1 Dipole Antenna = Easy Mod to make it a Mini-Windom Antenna ! | Shortwave | |||
Antenna Suggestions and Lightning Protection | Shortwave | |||
Imax ground plane question | CB | |||
Introduction to "AM" Medium Wave DXing - by the Ontario DX Association (ODXC) | Shortwave | |||
Smith Chart Quiz | Antenna |