| Home |
| Search |
| Today's Posts |
|
#16
October 26th 06, 05:43 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Hf Antenna Question - so what's the conclusion?
wrote: * Is "bunched" or "flat" better? * Are they basically single-band or wide-band or somewhere in-between? * Are there "rules of thumb" to make them for hams with * No test equipment? * A grid-dip meter? * A noise bridge? * An antenna analyzer? Possibly this has been posted previously...but just in case: http://www.bcdxc.org/balun_information.htm#Ed,%20WA2SRQ Measurements of practical baluns of various types using an HP Vector Impedance Meter. It should answer most of your questions above. 73, Bill W4ZV |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Optimising a G5RV | Antenna | |||
| The Long and Thin Vertical Loop Antenna. [ The Non-Resonance Vertical with a Difference ] | Shortwave | |||
| Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? | Shortwave | |||
| SkyWire Loop Antenna [Was: Wire loop.] Question | Shortwave | |||
Threaded Mode
