LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old November 22nd 06, 04:09 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2006
Posts: 33
Default Questions on broadband antenna design (e.g. T2FD)

On Wed, 22 Nov 2006 01:01:56 +0000, Dave Oldridge wrote:

The loaded folded dipole idea is actually quite efficient if you stay above
the "knee" frequency. This is about .5 wave at the lowest frequency.


Good evening, Dave.

But, isn't there another frequency, around 1 full wavelength at the
operating frequency, above which efficiency starts to go to pot again?

125 ft (which you suggested in another message) is a full wave at
something a shade under 8 MHz, well within my upper limit of 9 MHz. So,
how will a 125-foot T2FD operate in the range of, say, 7 to 9?

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starting point for antenna design David Antenna 7 January 13th 06 03:11 PM
Eton Porsche Design P7131 Questions Bill Kraski Shortwave 1 December 25th 05 10:06 PM
The main problem with Ham radio... Observer Policy 59 February 1st 04 07:43 PM
BiQuad Design Specifications for Microwave? Robert Antenna 0 January 21st 04 02:58 AM
Response to "21st Century" Part Two (Communicator License) N2EY Policy 0 November 30th 03 01:28 PM


All times are GMT +1. The time now is 04:00 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017