Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 22nd 04, 05:35 PM
Arrow146
 
Posts: n/a
Default

If that is true, then there is no such thing as a 5/8 wave antenna. They
would be 3/4 wave antennas.


since when does 5/8 = 3/4 ?
last time I checked, 3/4 = 6/8


Sense always.
A two meter 5/8 wave length (48") whip does not work
very well. A 3/4 wave length whip will tune
up fine (low SWR) but has a very high angle
of radiation, still does not work well.

Take 1/8 wave (about 9 1/2 inches) of the
3/4 wave and turn it into a coil. And you
end up with an antenna about 48" tall that works
real well. (5/8 wave = 48")

I guess if you want to follow the CB Hipe about
antennas, it's up to you.

You think a 3 ft. 11 meter antenna that claims to
be of 5/8 wave antenna, works like a true 5/8 wave
length Antenna - - I think I will stop here.

I have a lot more important things I should be doing.
Arrow Antenna lost its lease on our building, wo we
had to move. I have a lot of equipment to get hooked
up again so we can get back into the production of
real antennas.

73 Al Lowe N0IMW
ArrowAntenna.com
911 East Fox Farm Road. #2
Cheyenne, WY 82007

307-638-2369
Fax 307-638-3521
  #2   Report Post  
Old January 22nd 04, 08:35 PM
'Doc
 
Posts: n/a
Default



Arrow,
One of those important things might be to explain to
me how 9 1/2" is a 1/8 wave at what frequency? I thought
we were talking 10 meters...
'Doc
  #3   Report Post  
Old January 22nd 04, 10:38 PM
JDer8745
 
Posts: n/a
Default

But you have to remember that a 5/8 lamda whip is really trying to be a
1.25-lambda dipole with half of the dipole kind of provided by the perfect
conductor infinite ground plane.

Just like a 1/4-lambda whip (vert) is similarly "equivalent" to a vertical
1/2-wave antenna.

A 1.25-lambda doublet (I won't call it a dipole for obvious reasons) has a nice
broadside gain over a 1/2-wave dipole.

Hey, if you orient it vertical, you have an omnidirectional "beam".

"Load your downspout!"

Jack, K9CUN
  #4   Report Post  
Old January 22nd 04, 11:05 PM
Arrow146
 
Posts: n/a
Default

Arrow,
One of those important things might be to explain to
me how 9 1/2" is a 1/8 wave at what frequency? I thought
we were talking 10 meters...
'Doc

Hello, Doc
As quoted below 2 meters (146 MHz.)
I use two meters because I have all the numbers in
my head, I don't have to use a calculator.
I don't make 10 meter antennas.

73 Al Lowe N0IMW

A two meter 5/8 wave length (48") whip does not work
very well. A 3/4 wave length whip will tune
up fine (low SWR) but has a very high angle
of radiation, still does not work well.

Take 1/8 wave (about 9 1/2 inches) of the
3/4 wave and turn it into a coil. And you
end up with an antenna about 48" tall that works
real well. (5/8 wave = 48")
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Mobile Ant L match ? Henry Kolesnik Antenna 14 January 20th 04 04:08 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 03:33 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017