| Home |
| Search |
| Today's Posts |
|
#8
|
|||
|
|||
|
All that I know about this particular tower is what I've
seen on the website given. I think raising the tower sections in this way is a pretty 'niffy' idea. As for the rest of the tower, it seems like just another 'square' tower with something like the 'hazer' added. Nothing wrong with it as far as I could see, but also not really anything 'special'. As Cecil said, any 'free standing' tower needs to have a very good (and large) base under it. Of course, that depends a lot on the type of soil it's in, but compared to a guyed tower in the same 'dirt', get ready for a suprise when you find out just how big that base has to be (then hang on to your wallet). I think the 'unsafe' guys in the advertising is a bit much. Sure, guys are not something to play on/around, and you do have to pay attention so that you don't 'clothes line' your self, but are they as 'unsafe' as implied? I doubt it. At least, not if they are done right. Can't say it isn't a nice tower, but I think you could do just as well with another brand at a much cheaper total price. Then again, I didn't see a price... 'Doc |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| BiQuad Design Specifications for Microwave? | Antenna | |||
| FS: tower and antennas | Antenna | |||
| EZ Way tower sheared hinge pin conclusion(?) | Antenna | |||
| EZ Way tower sheared hinge pin | Antenna | |||
| Best vertical 20m design? | Antenna | |||