Could you post the Murata part number? What data DO they have? If
they have complex impedance versus frequency, or apparent inductance
and Q versus frequency, or inductance, self-resonance, and Q versus
frequency, it should be nearly trivial to convert any of those to S11
versus frequency. Over at least a limited frequency range, you could
use RFSim99 to generate the S-parameter file from a model based on
inductance, Q and self resonance -- limited frequency range only
because you'll probably have a hard time getting the Q of the model to
match that of the inductor over a wide range.

Cheers,
Tom


On Jan 26, 2:19 am, "camelot" wrote:
Hello,
I'm simulating in my schematic an antenna whose representation in
based on s-parameters. I need to add in that schematic a matching
inductor whose model should be s-parameter based too. This inductor is
produced by Murata and I'would like to know if, in your opinion, is
possible to get the dataset of s-parameter for this component in
typical range of frequency. I visited their website but I'was not able
to find that data. Had someone did that before?

Camelot