LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old March 27th 07, 12:51 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 125
Default al coax


"Owen Duffy" wrote in message
...
"Tam/WB2TT" wrote in
:

BTW, the LMR240UF makes for great patch cords. It has a stranded
center conductor. 1/4 inch cable that is rated at 1500W. The LMR240


From the spec sheet, the average power rating at 30MHz is 1240W. I assume
that is with VSWR=1, so that a further derating is required for mismatch.
For example, at VSWR=2, the heating at a current maximum is nearly double
that for a flat line, so the power rating might be more like 620W with
VSWR=2.

Of course, in SSB telephony, the average power is very low and the cable
is
probably limited by voltage breakdown at peaks, specified as 5.6kW for
LMR240UF.

Owen

Something happened to my cut and paste. The 1500W was supposed to refer to
the non UF.

Tam/WB2TT


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Coax Connectors, Adapters & Bulk Coax Cable AAA RF Products Swap 1 December 20th 06 03:13 AM
Coax To Coax Noise transfer ? Robert11 Antenna 2 March 18th 06 09:16 PM
Coax To Coax Noise Transfer ? Robert11 Shortwave 5 March 13th 06 10:05 PM
Skywire coax cable vs. regular coax cable Jack Antenna 6 November 1st 04 04:04 PM
FS:RG8X 18 FT LENGTH COAX WITH COAX CONNECTOR Kb9igg Swap 0 October 31st 03 04:54 PM


All times are GMT +1. The time now is 10:02 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017