Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Some thoughts relevant to measuring Tx eq src impedance
Cecil Moore wrote in
t: Owen Duffy wrote: Cecil Moore wrote: Does that take into account the step-down transformation? The two previous paragraphs that you have omitted in your quote provide the context for the paragraphs that you did quote. The context is in the anode circuit of the PA being discussed. I'm in the process of moving and am having a hard time keeping up. If the amplifier were a class-A amp with a 50 ohm load resistor driving a 50 ohm load, would what you say still be true? I don't understand "a 50 ohm load resistor driving a 50 ohm load". The transformation issue pertains to the PI coupler, you cannot treat a PI coupler in the general case as an idealised symmetric n:1 transformer. It certainly isn't in a typical single ended RF linear amplifier. Owen |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
measuring impedance - I and V phase, or forward and reflectedsignal | Antenna | |||
measuring impedance - I and V phase, or forward and reflectedsignal | Antenna | |||
measuring impedance through a balun ? | Antenna | |||
Measuring RF output impedance | Homebrew | |||
Measuring RF output impedance | Homebrew |