| Home |
| Search |
| Today's Posts |
|
#10
May 31st 07, 03:37 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Splitter For Two Scanners And One Antenna ?
On Thu, 31 May 2007 06:31:23 -0400, (J. B. Wood)
wrote: In article , Roy Lewallen wrote: One of the properties of the splitter, as opposed to just a tee connector, is that the two receivers are isolated from each other. So turning one on or off or disconnecting it should have no effect on the other. Roy Lewallen, W7EL Hello, Roy, and all. I would also add that the degree of isolation achieved in an n-way splitter is predicated on how well the port being split n-ways is terminated in the splitter's design characteristic impedance (e.g. 50 or 75 ohms). Sincerely, Unless it's a quadrature hybrid. www.microlab.fxr.com/pdf/divrapps.pdf |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Antenna splitter? | Scanner | |||
| WTB: HF Multicoupler/Antenna Splitter | Shortwave | |||
| Antenna splitter | Scanner | |||
| Antenna splitter | Shortwave | |||
| Scanner antenna splitter | Scanner | |||
Threaded Mode
