"Cecil Moore" wrote in message
et...
amdx wrote:
I have put a picture on abse to show what I want.
Subject Line: Two Flag Patterns.

I doubt you can do that within EZNEC. It will probably
require generating two graphics and superposing them -
which you can accomplish by changing the reference gain
of the outer ring in EZNEC and using, e.g. MS Paint
for the superposition.
--
73, Cecil, w5dxp.com

I'll give that one a try.
Thanks again, Mike

"amdx" wrote in message
...

"Cecil Moore" wrote in message
et...
amdx wrote:
I have put a picture on abse to show what I want.
Subject Line: Two Flag Patterns.

I doubt you can do that within EZNEC. It will probably
require generating two graphics and superposing them -
which you can accomplish by changing the reference gain
of the outer ring in EZNEC and using, e.g. MS Paint
for the superposition.
--
73, Cecil, w5dxp.com

I'll give that one a try.
Thanks again, Mike

Hey Cecil, That does exactly what I wanted, although not
in the program I wanted.
Thanks, Mike

"amdx" wrote in message
...

"amdx" wrote in message
...

"Cecil Moore" wrote in message
et...
amdx wrote:
I have put a picture on abse to show what I want.
Subject Line: Two Flag Patterns.

I doubt you can do that within EZNEC. It will probably
require generating two graphics and superposing them -
which you can accomplish by changing the reference gain
of the outer ring in EZNEC and using, e.g. MS Paint
for the superposition.
--
73, Cecil, w5dxp.com

I'll give that one a try.
Thanks again, Mike

Hey Cecil, That does exactly what I wanted, although not
in the program I wanted.
Thanks, Mike

I have never used it, but there is a button on the main screen labeled Ref
Level, defaults to 0 dbi.

Tam/WB2TT

P.S. Check out the "Traceview" option, at least
in EZNEC 5. Go to "View", then open "Traceview"!
Think this might allow you to compair 2 overlayed
patterns-- tho haven't gone thru manual-- YET!
Jim NN7K

Tam/WB2TT wrote:

And, BTW, this DOES allows comparison of Plots, from
2 (or more?) antennas. I Tried it, works Great!
Jim

Jim - NN7K wrote:
P.S. Check out the "Traceview" option, at least
in EZNEC 5. Go to "View", then open "Traceview"!
Think this might allow you to compair 2 overlayed
patterns-- tho haven't gone thru manual-- YET! Jim NN7K

Tam/WB2TT wrote:

"Jim - NN7K" wrote in message
t...
And, BTW, this DOES allows comparison of Plots, from
2 (or more?) antennas. I Tried it, works Great!
Jim

Jim - NN7K wrote:
P.S. Check out the "Traceview" option, at least
in EZNEC 5. Go to "View", then open "Traceview"!
Think this might allow you to compair 2 overlayed
patterns-- tho haven't gone thru manual-- YET! Jim NN7K

Tam/WB2TT wrote:

Hi Jim,
I tried this and it's not working for me.
I can only get one trace in the view.
Can you walk me through your sequence of clicks?
Thanks, Mike

Try this (with Eznec 5)

Step 1 Open (or write) your file.
Step 2 Do farfield plot , then save
this file as (Tracefile (.pdf,pdf3)
You need to name this file!.

Step 3 Do the SAME steps for Antenna #2 (and
3,4,5, ect) be sure to use diff names!

Now, Step 4,go to (view, traceview), and this

will give a warning.Run , under the "traceview
window, the FIRST FILE you named.

Step 5 Now , click on "Add trace". insert the name of
the SECOND file you saved ( Warning- both must be in
SAME direction, AZMATH, or ELEVATION for this to
overlay) , and both ants pointing the SAME WAY!

Step 6 either print it, or add another file .
Think you find this works pretty well .
NOTE: this DOESN'T set yhe max gain to BOTH
antennas, but is great for comparison purposes.
Think its pg 93 in the pdf manual (not to be confused
with 93 on the adobe screen!
Jim NN7K

amdx wrote:


Hi Jim,
I tried this and it's not working for me.
I can only get one trace in the view.
Can you walk me through your sequence of clicks?
Thanks, Mike