Cecil-- think what he wants is a Pattern, of
antenna 1, layed over Pattern 2, Both referenced
to Each other (at a 0 dB reference. ) but as
stated, don't think the (-3) angle will change
drastically, nor the F.B. Ratio! Jim NN7K



Cecil Moore wrote:
amdx wrote:
I want the maximum gain point of each antenna to
reach the same point on the plot.

If the two antennas have different take-off-angles, that
will require a graphics program capable of rotating one
of the graphics by n degrees.
--
73, Cecil, w5dxp.com