I will be interested to see the replies. I have
mine hung with a series of TV coax cable clips. I
use the portion that goes over the coax to contain
one of the wires. I have not noticed any
difference, pre and post hanging. I was careful
to avoid hard right angles.

--
73 es cul

wb3fup
a Salty Bear

"Robert McCown" wrote in
message
. ..
Is is a bad thing to hold twin lead 450 ohm
feedline in place with staples?
I'm thinking the kind that come from a staple
gun or the insulated ones you
drive with a hammer.
If not, should I put the staples through the
dielectric or over the wires?
Thanks.
Bob AB0OD