LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Old July 16th 07, 06:31 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 234
Default extended double zepp

wrote in
ups.com:

On Jul 15, 9:41 am, "Amerigo Vespucci" wrote:
I constructed an extended double zepp for
10 meters out of #12 solid house wire .
I didn't have any ladder line laying around so I decided to make my
own but all I had was some #10 stranded wire. I made the spacers 1"
apart and and put about one per foot and the total feedling is
approximately 25 ft. and it's going through an MFJ 941E Versatuner .
I can't get my SWR's below 2 . I'm sure there are a lot of varibles
here but I was hoping someone could point me in the right
direction.My first guess is that I should have used the #12 for the
feedline and the #10 for the antenna .
Thanks in advance ,
Will


Seems kind of strange the tuner would not match it..
The spacing probably has more effect on the feedline Z
than the wire diameter. Shouldn't really be that critical.
The wider the spacing, the higher the Z..
I guess you could try a different length of line..
Or scrounge up some other ladder line, maybe with a
different length. Even 300 TV line would be ok if it's
not wet.
Myself, I used to feed them with coax, and coax
series transformers. I imagine you could also feed
with coax and use twin matching coils at the feedpoint
for both sides of the element. Same as matching a
5/8 GP, you are just doing the same with a complete
antenna. I've never tried it, but it should work.


My very first antenna project was a straight 20m zepp, end fed with
homebrew 600-ohm line 1/4 wave long just like in the books. I never ever
measured the SWR or even transmitted on it, but it was one GREAT
receiving antenna for 20m (that was in my SWL days).


--
Dave Oldridge+
ICQ 1800667


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
zepp antenne PH0HM Dx 1 January 2nd 07 02:19 PM
End Fed Zepp Antenna Geoffrey S. Mendelson Antenna 2 May 16th 06 09:10 PM
Extended Double Zepp Larry D Antenna 2 July 3rd 04 04:38 AM
Extended Double Zepp Larry D Antenna 0 July 2nd 04 11:32 PM
double double (bi)quad - feed impedance? Jeppe Antenna 0 March 23rd 04 10:08 PM


All times are GMT +1. The time now is 09:39 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017