Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
On 03 Sep 2007 03:26:50 GMT, Ed G
wrote: loop fed by an SG-237 tuner. I wanted the choke for the coax feeding the tuner. Hi Ed, You will have to choke the control lines just as much. I do have RF causing various issues inside the coach while I am transmitting. That could be as easily through the air, or "ground currents" in the chassis. All points of the chassis, doors, hood, etc. are not usually bonded very well. Even the exhaust system can be "floating" to provide a path from ground, right up into the engine compartment. On your RV grounding question, yes, the antenna feedpoint and all related ground areas are very well bonded to the main vehicle chassis with rather large tinned braid, (2" wide). Re my paragraph above, does this include doors? A lot may be taken for granted and hinged points are sometimes insulated, allowing large panels (capacitive plates) to couple RF inside what is considered to be an otherwise tight box. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
making a common mode filter | Antenna | |||
A different way to reduce common mode noise, | Shortwave | |||
A different way to reduce common mode noise, addendum. | Shortwave | |||
Common Mode noise reduction | Shortwave | |||
Common-Mode Noise . . . | Shortwave |