| Home |
| Search |
| Today's Posts |
|
#3
September 28th 07, 05:52 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
EZNEC - is there an easy way... SWR... ham-bands only?
Look up "Frequency Sweep, Input File" in the EZNEC manual index.
Roy Lewallen, W7EL wrote: I've been "playing" with W7EL's EZNEC a lot (it's downright ADDICTIVE!-), mostly comparing all-band wire antennas I might be able to construct. I know how to have it calculate SWR for, say, 3.5-29.7 MHz, but that results in a really-dense and hard-to-see chart. Is there a way to have EZNEC calculate SWR for JUST certain hambands withOUT showing the non-ham-band parts of the spectrum. For example, 3.5-4 AND 7-7.3 AND 14.0-14.35 AND ... but NOT including 4-7 OR 7.3-14 OR 14.35-21 OR .... |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| [help] eznec\4 pro | Antenna | |||
| EZNEC ARRL and EZNEC 4 Demo: Setting default folders | Antenna | |||
| IC-208: easy way for easy install/remove the front panel? | Equipment | |||
| IC-208: easy way for easy install/remove the front panel? | Equipment | |||
| get on the ham bands fast and easy make up a callsign. | CB | |||
Threaded Mode
