| Home |
| Search |
| Today's Posts |
|
#10
October 18th 07, 02:05 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Cheap n Easy Dipole Supports
Tried 2 tv masts today 20ft total.
Antenna is A NW antennas L-160 loaded DIpole, fairly heavy. Bent them suckers right over. Need that tree next door back  ============== You might not need that tree,but instead stiffen the 2 TV masts,by fitting (in the middle of each mast) 2 outriggers perpendicular to the mast in the same vertical plane in line with the antenna. You then connect the free ends of the outriggers with both top and bottom of the mast using steel wire + tensioners. Frank GM0CSZ / KN6WH |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| what are you using for dipole supports | Antenna | |||
| Workman BS-1 Dipole Antenna = Easy Mod to make it a Mini-Windom Antenna ! | Shortwave | |||
| Intrusion system, *Easy* & *Cheap-to-build* plans, need | Equipment | |||
| Building a cheap easy cb antenna | Antenna | |||
| IC-208: easy way for easy install/remove the front panel? | Equipment | |||
Threaded Mode
