Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I sometimes use a 33 foot vertical with 16 25 foot radials laying on the
ground. I feed this with 450 ohm window line and use it multiband. It is an excellent performer for me. I want to understand what is happening at the feedpoint on 20 meters and 40 meters on both conductors of the feedline. -- Bob Kimbrell W7KU Kansas City, MO http://kimbrell.freeshell.org/ SDF Public Access UNIX System - http://sdf.lonestar.org |
#2
![]() |
|||
|
|||
![]()
On Wed, 7 Nov 2007 17:35:10 +0000 (UTC), "Robert M. Kimbrell"
wrote: I sometimes use a 33 foot vertical with 16 25 foot radials laying on the ground. I feed this with 450 ohm window line and use it multiband. It is an excellent performer for me. I want to understand what is happening at the feedpoint on 20 meters and 40 meters on both conductors of the feedline. Hi Bob, At least one feedline conductor is a miserable horizontal radiator. However, with this excellent performer, don't look for cavities in the oral opening of an Equine. 73's Richard Clark, KB7QHC |
#3
![]() |
|||
|
|||
![]()
Robert M. Kimbrell wrote:
I sometimes use a 33 foot vertical with 16 25 foot radials laying on the ground. I feed this with 450 ohm window line and use it multiband. It is an excellent performer for me. I want to understand what is happening at the feedpoint on 20 meters and 40 meters on both conductors of the feedline. Assuming the feedpoint impedance on 40m is somewhere around 35 ohms, the 40m SWR on the 450 ohm line would be around 13:1. Assuming the feedpoint impedance on 20m is around 1200 ohms, the 20m SWR on the 450 ohm line would be around 3:1. You probably should make the ladder-line somewhere around an integer number of 1/2 wavelengths long on 40m and your tuner should be able to handle the rest. You will have some common mode current in the system that could cause some radiation and losses from the ladder-line. -- 73, Cecil http://www.w5dxp.com |
#4
![]() |
|||
|
|||
![]() An old answer for multiband the easy way was a 22 foot vertical with 22 foot radials and open wire feed... I like yours better because your vertical is taller... denny / k8do |
#5
![]() |
|||
|
|||
![]()
Denny wrote:
An old answer for multiband the easy way was a 22 foot vertical with 22 foot radials and open wire feed... I like yours better because your vertical is taller... Which makes it fairly useless on 10m. 22 ft is just about the maximum monopole height for good low angle radiation on 10m. 17m is just about the highest useful frequency for a 33 ft. monopole. I had very good performance on 40m-10m feeding the 22 foot system with an SG-230. -- 73, Cecil http://www.w5dxp.com |
#6
![]() |
|||
|
|||
![]()
Cecil Moore wrote:
: Assuming the feedpoint impedance on 40m is somewhere : around 35 ohms, the 40m SWR on the 450 ohm line would : be around 13:1. Assuming the feedpoint impedance on : 20m is around 1200 ohms, the 20m SWR on the 450 ohm : line would be around 3:1. What I am trying to understand is the current on each conductor of the 450 ohm line. Are the radials a high impedance on 20 meters with a 33 foot radiator? I can disconnect the radials and have an endfed zep and it works ok. Connecting the radials makes the antenna perform better and the tuning is different on the tuner in the shack. -- Bob Kimbrell W7KU Kansas City, MO http://kimbrell.freeshell.org/ SDF Public Access UNIX System - http://sdf.lonestar.org |
#7
![]() |
|||
|
|||
![]()
Robert M. Kimbrell wrote:
Are the radials a high impedance on 20 meters with a 33 foot radiator? No, 25 foot radials laying on the ground are not a high impedance on 20m. One side of the feedline sees about 1200 ohms, the other side sees an impedance probably much lower than 1200 ohms. I can disconnect the radials and have an endfed zep and it works ok. With an unbalance of the currents. One side sees about 1200 ohms, the other side sees an open-circuit. An endfed Zepp requires 1/4WL of feedline. Is your feedline an odd multiple of 1/4WLs on 20m? Probably not unless you designed it that way. Connecting the radials makes the antenna perform better and the tuning is different on the tuner in the shack. Either way, you have common-mode currents on the feedline. The radial configuration doesn't require 1/4WL of feedline and may just be more efficient. -- 73, Cecil http://www.w5dxp.com |
#8
![]() |
|||
|
|||
![]() Which makes it fairly useless on 10m. 22 ft is just about the maximum monopole height for good low angle radiation on 10m. 17m is just about the highest useful frequency for a 33 ft. monopole. I get a nose bleed when the radio tunes that high.... denny / k8do |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Best Multiband HF Vertical on a roof | Equipment | |||
multiband vertical | Antenna | |||
Balanced feedline for vertical antenna? | Antenna |