Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Owen Duffy wrote:
Tony Giacometti wrote in news:suednRqSYJd58aLanZ2dnUVZ_uDinZ2d@hawaiiantel. net: also, if these loops don't work then why do these designs exist? Tony, A few questions: 1. With a 50 load on the preamp input, when tuned to a quiet spot in the band, RF gain full, preamps on, telephony bandwidth, does the S meter deflect at all? not noticeable 2. If no s meter deflection, note the receiver audio output voltage. 125mv 3. With the loop connected on the preamp input, when tuned to a quiet spot in the band, RF gain full, preamps on, telephony bandwidth, does the S meter deflect at all? not noticeable 4. If no s meter deflection, note the receiver audio output voltage. 150mv 5. What is the ratio of the voltage at 4 to the voltage at 3? If it is more than about 3:1, you have achieved nearly as good a S/N ratio as is possible. Owen |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Low Noise Receiving antennas | Antenna | |||
Receiving Loop | Antenna | |||
Receiving loop antenna design | Antenna | |||
Random Legth Receiving Only Ant.; Close Into A Loop ? | Antenna | |||
Technical question for receiving TV signals by a loop Antenna | Antenna |