If you have access to archives of CQ or 73 magazine, many years ago
there was an article describing the disassembly and rehab of the lower
coupling of the Hy-Gain line of vertical antennas. As I recall there
is some sort of internal coil/capacitor structure inside the lowest
foot or so of the antenna. My guess is that the story was done
sometime in the late 60's or the 70's.

This is going only on my memory. I don't have the issues.

Jon Teske, W3JT



On Wed, 28 Nov 2007 10:41:17 GMT, "JERD"
wrote:

I have changed over to a long wire antenna and have given my 20 year old
Hy-Gain 18AVQ vertical to a fellow ham. It needs some repairs and I am
wondering if anyone can lead me to the construction/assembly details of this
antenna.

In particular how the connector at the bottom of the antenna connects to the
internals!

VK5JE

You have hobbies. I have hobbies.
Chances are I have one that you don't.
I'll leave it up to you to decide!
http://www.flightsimulatorandhobbies.com/
-----------------------------------------