Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have purchased for very little money two identical VHF TV Yagi-Uda
antennas. They have 300 ohm output impedance, 5 elements, wide band. I am thinking to install both on the mast and connect both to a mixer in order to double the output. I’m not an expert in antenna design and therefore I’m asking for some clarifications: 1.. If my supposition is correct, at what vertical distance should I install the two antennas to avoid cross interference? 2.. I assume that to double the signal the cable type and length from the two antennas to the mixer has to be the same. Correct? Thank you very much, Gene |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Pictures of your antennas in the Antennas in the World directory | Antenna | |||
WTB 80/40 Mor-gain or Antennas West PM Antennas | Antenna | |||
Anybody tried one of these antennas | Antenna | |||
rf antennas | Homebrew | |||
fs: HF Rig, BA, Antennas, etc. | Swap |