LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old April 16th 08, 02:39 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2007
Posts: 69
Default 80m inductor kit or a pair of 80m traps?

When I put the homebrew HF traps in my wire Ariel how do I calculate the
length of wire before and after each trap for each band?

Thanks


"Barrett" wrote in message
.. .
Sorry about that, I should of said the length of my garden.
From the bottom of the garden up to the wall of the house it is 60 feet
and I do not have any chimney stacks to run wires from. My neighbours are
happy with a 20 foot pole at the bottom of the garden. Any higher and
there not happy about it so that's it for the height. At least there ok
with a 20' pole. I am limited on length of wire and unfortunately the
height as well. So any help is welcome.


"Owen Duffy" wrote in message
...
"Barrett" wrote in
k:

I have up a half size G5RV and want to add 80 metres it. I don't have
the space for a full size.

What is best to go for a 80m inductor kit or a pair of 80m traps?

Thanks



Reading through the responses, it seems that your requirement is actually
for a shortened wire antenna for 80 and 40.

The starting materials are a half sized G5RV (which is not a G5RV, but
one of the many variants).

You could salvage materials from the G5RV to make a trapped 80/40 dipole.

(The traps do not simply work as an on/off switch to disconnect the end
sections as implied by some. They might be seen to work that way if they
were resonant at the operating frequency, but they need not be, and there
is good reason for them to not be resonant at any operating frequency.)

Google around for designs for an 80/40 trapped dipole, there are plenty.
Decent articles will include details of the physical construction of the
traps.

There is a design on my web site, but it is probably too long for you (we
don't know your length requirements other than less than a G5RV, you
chose to not share that). Nevertheless, it might be an interesting read,
see http://www.vk1od.net/coaxtrap/8040.htm .

These type of antennas are affected by their environment, so you should
expect to need to fine tune the configuration. Be wary of varying
specific trap designs, you might dig a hole for yourself.

Owen





 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS:Crushcraft traps for a A-4 No Name Antenna 0 May 5th 07 06:07 PM
FA: Pair of NOS Amperex 3B28's, Pair or RCA 807's, 866A & 5R4GTY rich Boatanchors 0 January 10th 07 02:53 AM
FA: Pair of NOS Amperex 3B28's, Pair or RCA 807's, 866A & 5R4GTY rich Equipment 0 January 10th 07 02:53 AM
Capacitor Traps [email protected] Shortwave 0 January 15th 06 07:47 PM
WTB : Beam Traps NA1VT Equipment 0 October 16th 04 03:14 PM


All times are GMT +1. The time now is 05:28 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017