Home |
Search |
Today's Posts |
#16
|
|||
|
|||
MFJ-259Z
On Apr 2, 6:08*pm, (Dave Platt) wrote:
Dave, the batteries are called Supreme Power 2600mA standard charge 14-16 HRS x 260mA, quick charge 4-6 HRS x 550mA. REG USA Made in China. Hmmm. *I see various web sites offering that brand, but I don't see much in the way of comments about their quality (good or bad). I am waiting for a friend to bring by his old NiCad charger and I will give it ago. I will let you know how I got on. Please do - I'm curious. For future reference would you have an idea on how long I should charge the batteries for using the MFJ? Depends on the charger. *In general, a fully-discharged NiMH cell will need to be "fed" somewhere around 150% of its rated capacity in order to reach full charge - some of the energy fed into it is dissipated as heat and doesn't go into rebuilding the electrochemistry. *The "standard charge" recommendations you quoted are feeding the battery at a rate of .1C (10% of its capacity per hour) for 14-16 hours, so that's just about right. If you're using a different charger, you'd need to determine the amount of current being fed to each cell, divide that into the cell's rated capacity (to get the time required for 100% capacity delivery), and then add around 40-50%. These calculations apply *only* to cells which are fully discharged! If a cell is partially charged when you start to recharge it, it'll reach full charge sooner than these calculations indicate... and at that point the cell starts to heat up pretty rapidly. Most of the NiMH technology sheets I've read, seem to recommend charging these batteries at a relatively fast rate (no less than .2C, with .5C and 1C being common) and using a temperature sensor as the primary means of figuring out when to turn off the charge. Zero-delta-V is often used as a secondary method, with a timer being the final fallback. I don't know who or how the charger circuit has been modified. I could ask W&S what sort of circuit has been used. That would be a good idea! The 259/269 have a simple slow/trickle-charge circuit built in... it's OK for NiCd cells but isn't ideal for NiMH. *It would be very interesting to know how this was modified for NiMH in the 259Z model. -- Dave Platt * * * * * * * * * * * * * * * * * AE6EO Friends of Jade Warrior home page: *http://www.radagast.org/jade-warrior * I do _not_ wish to receive unsolicited commercial email, and I will * * *boycott any company which has the gall to send me such ads! You may want to use the NiCd charger on them for a few minutes and then move them to the NiMH charger. Jimmie |