Home |
Search |
Today's Posts |
#3
|
|||
|
|||
All the vertical part of the antenna is made of
aluminum tubing. B is a short peice of fatter aluminum tubing than either A or C. C electrically connects with A, so I presume there is a coil within aluminium tube B. Tube B, at the bottom, looks rivited to tube C. So I'm saying B is like: | | A _____|__|_____ | | | | |____|__|_____| | | | | | x | | x | | x | B | x | | x | | x | | x | |____|__|_____| | | |-----| Rivet |____| |_____| | | C | | There are insulated collarsat both ends of B. X represents assumed coil connecting A to C. [Best viewed with a monospaced font like courier new. ToolsOptionsReadFont Proportional Font:Courier New] |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |