Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
All,
Some History... My home, previously owned by my parents, has approximately a 30' Tower and has a channel master antenna (whats left) attached to it. It was used for TV/Radio reception originally. If I remember correctly it was around a $100-$125 bucks for the antenna alone and had a range (supposedly) of around 100-125 miles. I live in the suburbs of Toledo, Ohio. The current antenna had a bumpy start when the original installer (a professional) dropped the antenna from about 25 feet up. A few things were dented and broken. It was cleaned up and then the antenna was still installed. The decision was based on the fact that we are in the surburbs and the antenna was an overkill. From memory the unit had a cracked chunk of plastic and a bunch of dented\bent rods. We had no problems with the unit reception wise so it really did not affect its use. The antenna tower was second hand, but the rotor motor, antenna, all wiring and the control box was new. The rotor motor and its control box since installation has been used maybe 3 times. Once installed we had really good reception and picked up Detroit,Toledo,Some Cleveland (Good Day) and some single channel in Indiana. I do not remember any Columbus channels as some channels were really fuzzy. (not sure if it was columbus or not) Any Ways...Fast Forward ...a few years..... Then about 6 yrs ago, a year before I took posession of the house and when my parents were cable TV subscribers, the antenna broke basically in two and a large chunk of the antenna came crashing to the ground. The remaining antenna chunk and tower is still standing to this day. Its a eye sore to say the least. My goal is to replace the antenna and I need some advice. Would you keep the tower? The only thing I can see wrong with it is that it has a large bunch of vines growing up the middle. There is little to no rust. The vines have been recently chopped down but the higher section of vine is still intangled in the tower. I have tried to climb the tower and got about 15 feet up and it swayed a little so I came down. I am a little to heavy, or chicken, to be climbing towers. The vines should not affect climbing the tower. Or would I be better off/the same to get a roof mount antenna? I liked the range of the previous antenna, so what would everyone suggest for an antenna with a range of around 100-125 miles that could be mounted to a 30 foot tower and will be used for radio and TV reception I have made a few phone calls and everyone locally pushes the Channel Master but I am little nervous about having to have to do this every 7-10 years based on the last antenna. Has anyone had better experience with Channel Master? As its been used like three times, would you replace the rotor motor? What should I expect to pay to have a new antenna and rotor motor installed in my home? Anyone know a good antenna dealer in the Toledo, Ohio area? Thanks, Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|