| Home |
| Search |
| Today's Posts |
|
#1
June 17th 08, 07:57 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Yagicad 5.2 problem
Hello,
I have downloaded the latest version from http://www.nerg.asn.au/software.htm YC52DIST.zip The program does not run. When loading any xxxx.yag file and starting to calculate a pattern, it says: "Problem with Nec 2 Check Data file SXINFIL.NEC" When running an Auto Optimize for gain or F/B ratio the program goes into an endless loop. Win XP, all updates, and freshly installed VB5 runtimes. So far my system has sent ~ 100 problem reports to Microsoft :-) Can anyone help? w. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| problem ts-870 | Shortwave | |||
| Help! Problem with 148 GTL | CB | |||
| Haynie admits to problem, alzheimers victims respond with, "What problem?" | Policy | |||
| BPL might not be such a problem after all | Shortwave | |||
| PL-230 problem | Shortwave | |||
Threaded Mode
