Home |
Search |
Today's Posts |
#1
|
|||
|
|||
r7 vertical resonates too high
my r7 vertical resonates about 450khz too high on ALL bands. This antenna is 15 years old, all dimensions are correct, and it suddenly jumped in resonance after working perfectly for years...nothing has changed physically...just resonates way too high all of a sudden...cap problem in matching network?...something else in the black box?...any ideas?...contact direct at coyotevergreen at q dot com. Thanx. K0SDC
Last edited by coyotevergreen : September 3rd 08 at 05:36 AM |
#2
|
|||
|
|||
r7 vertical resonates too high
On Wed, 3 Sep 2008 05:33:58 +0100, coyotevergreen
wrote: any ideas? Radials/counterpoise went south. 73's Richard Clark, KB7QHC |
#3
|
|||
|
|||
r7 vertical resonates too high
"Richard Clark" wrote in message ... On Wed, 3 Sep 2008 05:33:58 +0100, coyotevergreen wrote: any ideas? Radials/counterpoise went south. 73's Richard Clark, KB7QHC ---------- The R7 doesn't use radials or a counterpoise. It is the electrical equivalent of a 1/2 wave antenna on all bands. That was one of the reasons that it was so popular. Like the OP, I tend to agree that the problem is in the black box. There were several articles published on how to restore the black box to original specs. Anyone know of their location? Ed, NM2K |
#4
|
|||
|
|||
r7 vertical resonates too high
Richard Clark wrote:
On Wed, 3 Sep 2008 05:33:58 +0100, coyotevergreen wrote: any ideas? Radials/counterpoise went south. 73's Richard Clark, KB7QHC Ill second that, OR, maybe a crudded joint below the point where the traps start ( remove, clean, and coat with something like Noalox), then reassemble. Also, see : http://www.iol.ie/~bravo/r7_vertical.htm and: http://www.telusplanet.net/public/te...craft_trap.htm for info on R-7 repair-- Jim NN7K |
#5
|
|||
|
|||
r7 vertical resonates too high
Those 5 spokes are a 'capacity hat' loading the bottom half of the 'dipole'.
If the problem is on ONE BAND, I would look at the capacitor assy for that particular band. They are usually the first item to fail. Your R7 has been on borrowed time for a few years. Emil W9NM "Edmund H. Ramm" wrote in message ... In "Ed Cregger" writes: [...] The R7 doesn't use radials or a counterpoise. Yes it does, those 5 spokes are the counterpoise. It is the electrical equivalent of a 1/2 wave antenna on all bands. Lambda 3/8. [...] Like the OP, I tend to agree that the problem is in the black box. There were several articles published on how to restore the black box to original specs. Anyone know of their location? http://www.iol.ie/~bravo/r7_vertical.htm 73, Eddi ._._. -- e-mail: dk3uz AT darc DOT de | AMPRNET: If replying to a Usenet article, please use above e-mail address. Linux/m68k, the best U**x ever to hit an Atari! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|