| Home |
| Search |
| Today's Posts |
|
#2
September 11th 08, 09:07 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
elevator noise part deaux
On Thu, 11 Sep 2008 14:58:47 -0400, ml wrote:
i took my ft817 shut the other elevator off and moving the rig around i see i got no interference from the computer board getting near the magnetek big time noise Hi Myles, One thing that I observed in the PDF you supplied was the Input Power specification that states: Line Impedance: 3% without choke / 1% with choke Check to see if the input power is choked. 73's Richard Clark, KB7QHC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| noise canceling Elevator /HF? | Antenna | |||
| elevator noise? | Antenna | |||
| WTB Zenith part/part radio | Swap | |||
| WTB Transoceanic Part/Part radio | Boatanchors | |||
| WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter | Homebrew | |||
Threaded Mode
