LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #21   Report Post  
Old May 31st 09, 01:52 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Mar 2007
Posts: 3,521
Default Tube and Twin lead Slim Jim

LAB wrote:
I know what is velocity factor. It is determined by L and C. In the
"other" Slim Jim a plastic tube was between the 2mm wires, but performances
was similar to the 6mm tube antenna, in which only air is between the tube


The plastic tube had mostly air between the conductors.
The insulation on 300 ohm twinlead or window line is solid
dielectric around and between the two wires. VF is easy
enough to measure with something like an MFJ-259B.

I measured the VF of 300 ohm window line at 0.8
--
73, Cecil, IEEE, OOTC, http://www.w5dxp.com
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
100 Ohm Twin Lead Sonny Hood Antenna 36 May 18th 06 04:46 AM
Twin lead lightning arrestor? [email protected] Antenna 3 February 19th 05 03:36 AM
300 Ohm Twin Lead Antenna Wire /* frank */ Antenna 4 July 3rd 04 05:39 PM
300 Ohm Twin Lead Antenna Wire /* frank */ Antenna 0 July 3rd 04 04:22 PM
Staples and twin lead Robert McCown Antenna 4 July 28th 03 06:18 PM


All times are GMT +1. The time now is 02:52 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017