LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old July 30th 03, 05:55 PM
greg z
 
Posts: n/a
Default

Subject to restrictions and poor location, I can't install any antenna.
My window has an aluminium frame.
I considered to use it as a loop, but it is inherently shorted.
How would you feed that ?
Freq : FM BC band.
Window : abt 0.90 * 1.60 (metres)
Thanks by adv


...........................................
Try connecting your leads (both) to various points on the window,you might get
lucky. I was able to achieve resonance with the windscreen
frame on a Sunbeam Tiger I restored. Luckily the spacing of the mounting studs
were close to the right tap points.
Works better the the usual 1/4 wave whip!
KC*VIF
Greg Z
to thine own sound be true


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Varactor tuning on a magnetic loop Nic. Santean Antenna 0 July 26th 03 02:44 PM
SWL tuning an MFJ loop? Hatfield Antenna 3 July 25th 03 11:44 PM


All times are GMT +1. The time now is 12:52 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017