Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Aluminium oxide removal
Hi All,
A bit trivial but very common problem... I got a free 203BA i had to remove from a tower. It has been there for years. All parts are OK except that i can't dismantle some elements. Certain tube junctions are corroded despite some tape protection, and the elements are like soldered. Is there a safe way to remove the aluminium oxide so i can disassemble the elements for transportation ? I've been told that letting petroleum seep between the elements would help. But that can take days or ... weeks... I'm sure, you all had this problem one day and that someone found a "good" solution. Thanks for any comments, 73, Patrick TK5EP |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Where can I get aluminium foil (0.5 cm thickness) for HomebrewButterfly Capacitor | Homebrew | |||
Aluminium for antenna design | Antenna | |||
aluminium element segment corrosion & weather proofing... ? | Antenna | |||
MFJ557 keyer & oxide points | Equipment | |||
MFJ557 keyer & oxide points | Equipment |