Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
i have a transmitter 50 ohm output at 1431khz medium wave band. my antenna is an inverted-L antenna with (5/16)*wavelenght total lenght (20 meters
vertical and 45 meters horizontal wire 2,5mm). i have 3 scematics for antenna coupler system. The first and the second schematic send me 2 radioamateurs. I calculate the third coupler with 4nec2 software. Which coupler is the best for my antenna??? do you have to propose another schematic? i have a variable capacitor 500pf and a variable coil about 100uH. thanks http://www.sv9cvk.gr/images/KWcoupler/COUPLER.jpg http://www.tzitzikas.webs.com/match.JPG http://www.tzitzikas.webs.com/4nec2.JPG |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
medium waves match antenna-transmitter 50ohm system | Antenna | |||
AM Medium Wave Radio Listening Requires a Good AM Medium Wave Antenna | Shortwave | |||
FS Antenna coupler | Antenna | |||
FYI - New AM {Medium Wave} DX Loop Antenna using Litz Wire plus Longwave LW Lowfer DX Loop Antenna | Shortwave | |||
Traveling Waves, Power Waves,..., Any Waves,... | Antenna |