Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Dustin wrote:
Hello, I am going to be building a few J-poles out of 450 ohm 18 gauge ladder line, I was wanting to mount them into PVC pipe, but havnt seen any plans for doing this? does anyone know of a link to a site where this has been done or tell me how much they think this will change my SWR readings? Thank you very much. Dustin KC8ZEm Didn't change my SWR at all, or at least it wasn't a noticeable amount. Irv VE6BP -- -------------------------------------- Diagnosed Type II Diabetes March 5 2001 Beating it with diet and exercise! 297/215/210 (to be revised lower) 58"/43"(!)/44" (already lower too!) -------------------------------------- Visit my HomePage at http://members.shaw.ca/finkirv/ Visit my very special website at http://members.shaw.ca/finkirv4/ Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/ -------------------- Irv Finkleman, Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP Calgary, Alberta, Canada |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Methods for ladder line feed on rotatable antenna? | Antenna | |||
100 w, Automatic Ladder line HF tuner | Antenna | |||
Ladder Line or Coax For Reception only? | Antenna | |||
Ladder line questions | Antenna | |||
Complex line Z0: A numerical example | Antenna |