Home |
Search |
Today's Posts |
#12
|
|||
|
|||
Use RG-174. Finding an inexpensive SMA connector for RG-58 is difficult.
Jim "Dustin" shared these priceless pearls of wisdom: -Hello, I am going to be making some adaptor harnesses for my HT, they are -going to have a PL-259 on one end and a SMA male end on the other, my -question is are the center conductor's inside the RG-58 and RG-174 the same -diameter because I see all the jumper harness's that are available -commercially made of RG-174, but when I see DIY pages they are made of -RG-58, and I just want to make sure. I read that RG-58 has alot less loss -and is cheaper. Thanks - - Jim Weir, VP Eng. RST Eng. WX6RST A&P, CFI, and other good alphabet soup |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna |