Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
In article ,
"Szczepan Bialek" wrote: The first sensible question. "Radials and Counterpoises have two basic purposes: 1. To improve the RF ground conductivity for the ground current return path. Unless you live in a salt-water swamp, your ground conductivity makes a very poor path for the return of ground currents. This increases the ground losses and reduces the efficiency of an antenna that needs a good RF ground. E. More radial wires are generally better. As the number gets larger, they improve the RF Ground less and less, to the point where there is no difference when adding one more radial to a system that already has 120 installed. Minimum systems of as few as 4 wires can provide an acceptable ground and increase the antenna's efficiency by a significant amount. Generally, 6-8 radials is the minimum that should be used." From: http://www.sgcworld.com/radialstechnote.html If you believe ANYTHING that was published by SGC, you need to go back to school and relearn everything you ever thought you knew about RF Antenna Systems. There is a reason Don Stoner, left the company decades ago, and PeeAir couldn't design his way out of a Wet Paper Bag. As you see in the radials are many ends. There is the lower voltage and almost no radiation (electron loss). Radial work like the receiver antena (caught electrons from air) Without the radials your stations can work only in a "salt-water swamp". S* |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Easy way to learn English ***** download materials | Shortwave | |||
Antenna Building Materials | Antenna | |||
Reference Materials Wanted | Shortwave | |||
Reference Materials Wanted | Scanner | |||
RF transmission through various materials | Antenna |